Shrink Sleeves

Full-body shrink sleeves made in the UAE for your brand.

Kimoha Entrepreneurs FZCO · Shrink sleeves

Shrink sleeves, made in the UAE to fit your pack.

A shrink sleeve is a printed film sleeve that slips over the container and shrinks tight with heat, following every curve of the pack. It gives you branding from top to bottom, on shapes where a flat label cannot reach. Kimoha Entrepreneurs FZCO makes them in the UAE for brands across the region.

Shrink sleeves made by Kimoha Entrepreneurs FZCO, fitted tightly around branded containers
  • Shrinks to fit

    Slipped over the container, then shrunk with heat to follow its shape.

  • Branding all round

    Artwork covers the full body of the pack, from edge to edge.

  • Printed to your design

    Your brand, your artwork, your information, ready for your line.

How it works

How a shrink sleeve works, from flat film to a perfect fit.

Three simple steps turn printed film into branding that follows the exact shape of your pack.

  • Shrink sleeve film printed with bold artwork and formed into sleeves, made by Kimoha Entrepreneurs FZCO

    Printed and formed

    Your artwork is printed on shrink film, then formed into a sleeve that is ready to go over your container.

  • Printed shrink sleeve being placed over a bottle, made by Kimoha Entrepreneurs FZCO

    Placed over the container

    The sleeve is fitted over the filled container, loose at this stage, with room to slide into position.

  • Shrink sleeve fitted tightly around a contoured bottle after heat shrinking, made by Kimoha Entrepreneurs FZCO

    Shrunk tight with heat

    The pack passes through heat and the sleeve shrinks to follow every curve, giving a tight, smooth finish.

Sleeve types

Shrink sleeve types for every pack, made to your specification.

The right sleeve depends on your container, how much of it you want to cover and what the pack needs to show. Here are the types we make.

  • Full-body shrink sleeve covering a contoured bottle, made by Kimoha Entrepreneurs FZCO

    Full-body sleeves

    Sleeves that cover the container from top to bottom, giving edge-to-edge branding that follows every curve. Ideal for contoured and unusual shapes.

    • Bottles
    • Jars
    • Contoured packs
    Enquire about this type
  • Shrink neck band over the cap of a bottle, made by Kimoha Entrepreneurs FZCO

    Neck bands

    Narrow bands that fit over the cap and neck of the container. They add branding and information, and can show whether a pack has been opened.

    • Bottles
    • Jars
    • Closures
    Enquire about this type
  • Speciality shrink sleeves with special finishes, made by Kimoha Entrepreneurs FZCO

    Speciality sleeves

    Sleeves made for special requirements: special films, finishes or effects. Tell us what your pack needs and we will advise.

    • Special films
    • Special finishes
    • Custom designs
    Enquire about this type
How to specify your sleeve

Tell us these six things, we will take it from there.

You do not need every answer. Share what you know and we will help with the rest.

Send your requirement

  1. Your product and container

    What goes in the pack, and what the container is made of. Its shape matters most: sleeves follow curves, so tell us about any waist, shoulder or taper.

    For example: contoured PET bottle, glass jar, can, tube.

  2. How much to cover

    A full-body sleeve over the whole container, a neck band over the cap and neck, or both together.

    For example: full-body sleeve, tamper-evident neck band.

  3. Filling and conditions

    How the pack is filled and stored: hot-filled, chilled or frozen, damp, or in contact with oils and cleaning products.

    For example: hot fill, cold storage, bathroom use.

  4. How it will be applied

    By hand or by a sleeving machine, how the sleeve will be shrunk, and the speed of your line if you know it.

    For example: hand application, semi-automatic, high-speed line.

  5. Size and quantity

    The height of the area to cover, the width at the widest and narrowest points, and roughly how many you need to start and over the year.

    For example: 180 mm tall, 65 mm at the widest point, first order and monthly volume.

  6. Artwork and information

    Your artwork and colours, barcodes, legal or regulatory text, and the languages you need, such as Arabic and English.

    For example: print-ready artwork, or a brief if you do not have it yet.

Our process

How we work, from your brief to your door.

A clear path from your first message to sleeves ready for your line.

  1. Share your brief

    Tell us your product, container and requirements. The checklist above shows what helps most, especially the shape of your pack.

  2. We recommend

    We suggest the sleeve type, film and finish that suit your pack and your filling line, and explain why.

  3. Artwork and approval

    We prepare your artwork for production and confirm it with you before anything is printed.

  4. Production

    Your sleeves are printed and finished to the approved specification.

  5. Delivery

    Sleeves are packed and delivered, ready to go onto your sleeving line.

Working to a deadline? Tell us when you send your brief so we can plan around it.

Start with your brief
Get started

Ready for your shrink sleeves? Tell us what you need.

Choose the sleeve types you are interested in, then send us your requirement. We will come back with advice and a quote.

I am interested in