Speciality Solutions
DMC USA

Crimp Tools
Kimoha supplies crimp tools from DMC®, a specialist manufacturer of tools for terminating electrical contacts. The range covers indent and form crimp tools as well as general maintenance tools, so you can find the right tool for the contacts you work with. DMC crimp tools are available in several types to suit different working environments:
Manual Crimp Tool
Pneumatic Crimp Tool
Battery Powered Crimp Tool

Insertion/Removal Tools
Kimoha supplies DMC insertion and removal (I/R) tools for connector assembly. These tools are used to insert and remove contacts, check that contacts are properly retained, and hold connectors while accessories such as backshells, strain reliefs and shielding are fitted. They are available in probe, tweezer and plier styles, in plastic and metal, to suit a wide range of connectors, including military-specification circular connectors.

Contact Retention Tools
Kimoha supplies DMC contact retention tools, which are used to check that contacts are correctly seated and locked in place inside a connector. Testing contact retention after assembly or repair helps to confirm that connections are secure before equipment goes back into service. Contact Kimoha to find the right retention tool for the connectors you work with.

Adapter
DMC adapter tools, supplied by Kimoha, hold connectors securely while backshell accessories are fitted. Adapters are available for many military and commercial circular connectors.

Jam nut sockets
Kimoha supplies DMC jam nut socket tools, which are used to install jam nut receptacle connectors. They are a practical choice for assembly areas and are available in different constructions, including composite, machined aluminium and formed steel versions, so you can choose the right socket for your application.

Banding tools
Kimoha supplies DMC banding tools, which are used to install the metal bands that terminate electromagnetic interference (EMI) shielding on cables and connectors. Reliable band installation is important in systems where performance and safety matter, and these tools are widely used in the aerospace, defence and electronics industries. DMC one-step banding tools cut, bend and lock the shield band in a single operation, and are available for different band widths. Contact Kimoha to find the right banding tool for your work.

Tool Kits
Kimoha supplies DMC® tool kits for electrical wiring interconnect systems (EWIS). Each kit brings together the tools needed to prepare, terminate, install and remove wire for a particular platform or group of platforms, so technicians have everything they need in one place. Tools are kept organised and protected in a range of carrying options, including hand-carry kits, trolley cases, drawers and roll-around cabinets. Kits can be put together for specific connectors, terminals, splices and contacts, and ready-to-use kits are also available for commercial and military helicopters. A single kit can support one aircraft type or a mixed fleet. Talk to Kimoha about the right DMC tool kit for your maintenance or production team.

Safe-T-Cable
Kimoha supplies Safe-T-Cable®, a cable-based system used to secure bolts, nuts and other fasteners so they do not work loose in environments with high heat and vibration. It is used as an alternative to traditional lockwire and is installed with dedicated tooling, which helps to give a consistent result each time. Safe-T-Cable installations leave no sharp wire ends, which helps to reduce the risk of injury, and the system is straightforward for technicians to learn.

Safe-T Cable Tool
Kimoha supplies Safe-T-Cable® installation tools in manual, pneumatic, battery and manual-hydraulic versions. Adjustable tension tools can be set to the cable tension your application requires, while pre-set tension tools are set in advance and can be operated with one hand. Different nose lengths are available to suit most applications, and noses can be swapped between tools that use the same cable size.

Lacelok
Kimoha supplies LaceLok®, a system for supporting secondary wire harnesses that is used in place of hand-tied lacing and cable ties. LaceLok is made up of cable lacing fasteners and a dedicated installation tool. The lace is made from a non-abrasive aerospace-grade fibre with a small, rounded fastener, and is designed to perform in harsh conditions, including high and low temperatures and exposure to common aviation fluids. Because it is installed with a tool rather than tied by hand, LaceLok helps to reduce the strain and repetitive effort that hand lacing and cable ties can cause for operators.

Go/No-Go Gauges
Kimoha supplies DMC go/no-go gauges, which are used to check the tolerances of crimp tools and confirm that they are within specification. Regular inspection helps ensure your tools continue to produce reliable crimps.

Tensile testing equipment
Kimoha supplies DMC tensile testing equipment, which is used to measure the strength of crimped connections. Pull testing helps you confirm that your crimping process is producing secure terminations and supports quality control in production and maintenance.
Speciality Tools and Solutions from Kimoha
Kimoha is equipped with latest technologies and creative, coffee-fueled professionals